Pleased i need this today…… thank you

                    This is a physical science multiple choice questions test………

                                           I need this done today by 7pm

Please I have attached the pictures for questions 1, 5, and 10 at the bottom.

 1.  Go to this website to open the Circuit Construction Simulator:

http://phet.colorado.edu/en/simulation/circuit-construction-kit-dc

If you can not get the simulation to run right away, please check the following:

Make sure you have Java installed and updated.

https://www.java.com/verify

Make sure your security settings (Apple Menu > System Preferences > Security & Privacy > General tab) allows apps downloaded from anywhere. You can change this back after running the simulation if you wish.

Click and drag one battery, two resistors, and seven wires from the white box to the left of the screen.

Arrange the pieces into a circuit with the battery on top and the two resistors on the bottom: “LOOK AT PICTURE 1-1” (ATTACHED)

Click on the battery and use the slider to change the voltage to 9.0V. 

Click on the left resistor and change the value to 10 Ohms.

Click on the right resistor and change the value to 20 Ohms.

“LOOK AT PICTURE 1-2” (ATTACHED)

Click the non-contact ammeter button in the middle of the green box. Place the crosshairs of the non-contact ammeter on the wire several places around the circuit to find the current in the wire.  What is it? ” LOOK AT PICTURE 1-3″ (ATTACHED)

  • 0.15 A
  • 0.30 A
  • 0.45 A
  • 0.60 A

2. Is this circuit arranged in series, in parallel, or in both formations?

  • Series
  • Parallel
  • Both series and parallel

3. Based on your answer from #2, use one of the following equations to calculate the total resistance of the circuit.

Resistance in series:

Rtotal=R1+R2

Resistance in parallel:

1/Rtotal=1/R1+1/R2

  • 6.67 Ohms
  • 10 Ohms
  • 20 Ohms
  • 30 Ohms

4. Now, using Ohm’s Law:

I=V/R

and the total resistance calculated in #3, what is the total current of this circuit?

  • 0.15 A
  • 0.30 A
  • 0.45 A
  • 0.60 A

5. Click the voltmeter.  A voltmeter measures the difference in the voltage between 2 places on a circuit. This is called the voltage drop. Place the contacts of the voltmeter on the circuit on either side of the battery.

Note: The voltmeter tells you the voltage drop between the two points in the circuit touched by the probes. 

Voltage works in a similar fashion to gravitational potential energy based on height.  Balls will only roll down board if one end is higher than the other (so it is sloped). The ball (electron) at the higher end of the board (wire) has lots of potential energy (voltage). The ball will roll down the board (electron will move through the wire) to the lower end of the board that has less gravitational potential (less voltage). You could use a ruler to measure the height difference between the high point of the board and the low point where the ball moves to. This would be the change in height or how hard the ball dropped in height. For the electron, you would use a voltmeter to measure how much the voltage dropped from one point to another.  “LOOK AT PICTURE 5 (ATTACHED)”

What is the voltage drop across the battery?

6. Place the contacts on either side of the 10 Ohm resistor.

What is the voltage drop across the 10 Ohm resistor?

7. What is the voltage drop across the 20 Ohm resistor?

8. Add together your answers from #6 and #7.  Is this number greater than, less than, or equal to the voltage of our battery?

  • Greater than
  • Less than
  • Equal to

9. Change the voltage of the battery from 9 V to 15 V by Ctrl-clicking on the battery and selecting “Change voltage”.

Use the voltmeter to remeasure the voltage across each of the resistors.  Now how does the total voltage across the resistors compare to that of the battery?

Note: If you receive decimal points for any of your voltmeter readings, please round to the nearest whole number before adding and comparing.

  • Greater than
  • Less than
  • Equal to

10. Change the battery’s voltage back to 9 Volts, use three more wires, and rearrange your resistors so that the circuit is set up like this

” LOOK AT PICTURE 10  (ATTACHED)

Is this circuit arranged in series, in parallel, or in both formations?

  • Series
  • Parallel
  • Both Series and Parallel

11. Based on your answer in #10, use one of the following equations to calculate the total resistance of the circuit:

Resistance in Series

Rtotal=R1+R2

Resistance in Parallel

1/Rtotal=1/R1+1/R2

  • 6.67 Ohms
  • 10 Ohms
  • 20 Ohms
  • 30 Ohms

12. Now, using Ohm’s Law:

I=V/R

and the total resistance calculated in #11, what is the total current of this circuit?

  • 1.35 A
  • 0.90 A
  • 0.45 A
  • 0.30 A

13. Using the non-contact ammeter, what is the current through the path with the 20 Ohm resistor?

  • 1.35 A
  • 0.90 A
  • 0.45 A
  • 0.30 A

14. Again, using the non-contact ammeter, what is the current through the path with the 10 Ohm resistor?

  • 1.35 A
  • 0.90 A
  • 0.45 A
  • 0.30 A

15. Add your answer for #13 and #14 together.  What is significant about this number?

  • This is equal to the total current you found in #12.
  • This is less than the total current you found in #12.
  • This is greater than the total current you found in #12.

16. Use your observations of the circuit construction simulation experiment and your course notes to answer the following questions.

Which statement is true?

  • When two resistors are connected in series, there is less total current in the circuit than if the two resistors were connected in parallel.
  • When two resistors are connected in parallel, there is less total current in the circuit than if the two resistors were connected in series.
  • The total current is the same regardless of if the two resistors are connected in series or in parallel.

17. Which statement is true?

  • Current varies throughout a series circuit.
  • Current stays the same through a series circuit.

18. Which statement is true?

  • Voltage varies throughout a series circuit.
  • Voltage remains the same throughout a series circuit.

19. Which statement is true?

  • Current varies throughout a parallel circuit.
  • Current stays the same throughout a parallel circuit.

20. Which statement is true?

  • Voltage varies throughout a parallel circuit.
  • Voltage remains the same throughout a parallel circuit.
Calculate your paper price
Pages (550 words)
Approximate price: -

Why Work with Us

Top Quality and Well-Researched Papers

We always make sure that writers follow all your instructions precisely. You can choose your academic level: high school, college/university or professional, and we will assign a writer who has a respective degree.

Professional and Experienced Academic Writers

We have a team of professional writers with experience in academic and business writing. Many are native speakers and able to perform any task for which you need help.

Free Unlimited Revisions

If you think we missed something, send your order for a free revision. You have 10 days to submit the order for review after you have received the final document. You can do this yourself after logging into your personal account or by contacting our support.

Prompt Delivery and 100% Money-Back-Guarantee

All papers are always delivered on time. In case we need more time to master your paper, we may contact you regarding the deadline extension. In case you cannot provide us with more time, a 100% refund is guaranteed.

Original & Confidential

We use several writing tools checks to ensure that all documents you receive are free from plagiarism. Our editors carefully review all quotations in the text. We also promise maximum confidentiality in all of our services.

24/7 Customer Support

Our support agents are available 24 hours a day 7 days a week and committed to providing you with the best customer experience. Get in touch whenever you need any assistance.

Try it now!

Calculate the price of your order

Total price:
$0.00

How it works?

Follow these simple steps to get your paper done

Place your order

Fill in the order form and provide all details of your assignment.

Proceed with the payment

Choose the payment system that suits you most.

Receive the final file

Once your paper is ready, we will email it to you.

Our Services

No need to work on your paper at night. Sleep tight, we will cover your back. We offer all kinds of writing services.

Essays

Essay Writing Service

No matter what kind of academic paper you need and how urgent you need it, you are welcome to choose your academic level and the type of your paper at an affordable price. We take care of all your paper needs and give a 24/7 customer care support system.

Admissions

Admission Essays & Business Writing Help

An admission essay is an essay or other written statement by a candidate, often a potential student enrolling in a college, university, or graduate school. You can be rest assurred that through our service we will write the best admission essay for you.

Reviews

Editing Support

Our academic writers and editors make the necessary changes to your paper so that it is polished. We also format your document by correctly quoting the sources and creating reference lists in the formats APA, Harvard, MLA, Chicago / Turabian.

Reviews

Revision Support

If you think your paper could be improved, you can request a review. In this case, your paper will be checked by the writer or assigned to an editor. You can use this option as many times as you see fit. This is free because we want you to be completely satisfied with the service offered.